Sign in to save & sync
Sign in
Structural Steel & Industrial Sheds (PEB) — topic preview
Learn

Advanced

Structural Steel & Industrial Sheds (PEB)

IS 800, wind loads, purlins, bracing and erection for steel buildings

6 lessons · 52 min · 5 videos · 1 articles

Lessons

Factories, warehouses and large-span sheds are built in structural steel rather than RCC mainly because steel frames erect fast, span long distances with slender sections, and can be extended or altered later without the lead time concrete demands. A pre-engineered building, universally shortened to PEB, is a steel structure where the primary frames (tapered built-up columns and rafters), secondary members (purlins, girts) and cladding are designed as a single optimised system by the manufacturer, factory-fabricated to a close tolerance, and bolted together on site rather than welded.

The base material for rolled sections, plates and built-up members is governed by IS 2062, which specifies grades such as E250, E300 and E350 by minimum yield strength in MPa; a higher grade number means higher yield stress and usually a higher carbon-manganese content, so grade selection is a direct trade-off between member weight and cost. Hot-rolled sections (ISMB, ISMC, ISA, ISHB) follow IS 808 for dimensional properties, while PEB primary members are usually built-up I-sections welded from plate, tapered to follow the bending moment diagram and therefore lighter than an equivalent constant-depth rolled section.

The overall design of steel structures in India is governed by IS 800:2007, which moved Indian practice from the older working stress method to limit state design, matching international practice and giving more realistic utilisation of the material. A structural engineer licensed to certify the design must check the frame for strength, stability (buckling of columns and lateral-torsional buckling of beams), serviceability (deflection) and connections; a site engineer's job is to ensure what is fabricated and erected matches that design exactly, including bolt grade, weld size and camber.

Common PEB plate grade

IS 2062 E250

Design code

IS 800:2007 (limit state)

Rolled section dimension standard

IS 808

Remember on site

  • PEB systems optimise built-up, tapered members as one integrated frame, factory-fabricated and field-bolted.
  • IS 2062 grades (E250/E300/E350) are the usual plate and section material; IS 808 gives rolled-section dimensions.
  • IS 800:2007 is the current limit-state design code for general steel construction in India.
  • Site staff verify grade, bolt class and weld size match the approved drawing — they do not re-design the frame.

Check yourself

What design method does IS 800:2007 primarily use?

Which IS code specifies structural steel grades like E250, E300, E350?

In a PEB, what shape are the primary rafters/columns usually?

What does IS 808 specify?

What is a site engineer's main responsibility regarding the steel design?

Watch

Read further

© 2026 SiteMate. All rights reserved.