Building bye-laws are framed by each state or urban local body (municipal corporation, development authority) under state town planning legislation, so exact rules differ by city and state even though the underlying structure is similar everywhere — always check the specific bye-laws of the sanctioning authority for the project's location rather than assuming a figure from another city or project applies.
Floor Area Ratio (FAR), also called Floor Space Index (FSI) in some states, is the ratio of total permissible built-up (covered) floor area to the plot area; a plot of 500 m² with an FAR of 2 permits 1,000 m² of total built-up area across all floors. FAR/FSI varies by zone (residential, commercial, industrial), road width, and sometimes by specific government schemes (such as additional FAR for affordable housing or for TOD — transit-oriented development — zones near metro corridors) — the applicable FAR must always be confirmed against the current local development control regulations for the specific plot and zone.
Setbacks are the mandatory open distances from the plot boundary on each side (front, rear, sides) within which no construction (or only specified minor projections) is permitted; setback requirements typically increase with plot size and building height, and are enforced strictly because they protect fire-tender access, ventilation, light, and privacy between adjacent buildings — a setback violation discovered at completion can block occupancy certificate issuance and, in serious cases, lead to demolition of the encroaching portion.
FAR/FSI formula
Total permissible built-up area ÷ plot area
Example
500 m² plot × FAR 2 = 1,000 m² permissible built-up area
Remember on site
- Bye-laws are set locally by each state/urban local body — always verify against the specific sanctioning authority for the project's location.
- FAR/FSI is the ratio of permissible built-up area to plot area, and varies by zone, road width and applicable government schemes.
- Setbacks are mandatory open distances from plot boundaries, protecting fire access, light, ventilation and privacy.
- A setback violation found at completion can block occupancy certificate issuance or trigger demolition of the encroaching portion.
Check yourself
Who frames building bye-laws in India?
What does FAR/FSI of 2 on a 500 m² plot permit?
What do setbacks protect?
What can happen if a setback violation is discovered at project completion?
Why should FAR/FSI always be confirmed against current local regulations rather than assumed?
