Sign in to save & sync
Sign in

Superelevation on curves

Banking for a horizontal curve as per IRC 73

Explanation in

Superelevation

0

%

Calculated e
0 %
Outer edge raised by
0 mm (0 in)
Friction needed
0 — OK (≤ 0.15)

How we got this

  1. 1

    e

    Formula
    V² ÷ 225R
    Your numbers
    0² ÷ (225 × 0)
    Answer
    0 %
  2. 2

    Friction

    Formula
    V² ÷ 127R − e
    Your numbers
    0² ÷ (127 × 0) − 0
    Answer
    0

The theory behind it

Method used: e = V² ÷ 225R (max 7%)

IRC designs superelevation to counter 75% of design speed without friction: e = V² ÷ 225R, capped at 7% (plain/rolling). If capped, the friction needed at full speed, f = V² ÷ 127R − e, must stay ≤ 0.15; otherwise reduce speed or increase radius.

Assumptions used

  • •Max 7% plain/rolling, 10% hills (not snow-bound).

Codes & references

  • IRC 73:1980 — Geometric design standards
  • IRC 38 — Horizontal curves
History

Estimates for guidance only. Confirm quantities with your site engineer.

© 2026 SiteMate. All rights reserved.