Sign in to save & sync
Sign in

Crack injection (epoxy / PU)

Resin quantity and injection ports for structural cracks

Explanation in

Resin

0

L

Resin
0 L (0 US gal)
Injection ports
0 nos
Surface sealing length
0 m (0 ft)

How we got this

  1. 1

    Void

    Formula
    L × W × D
    Your numbers
    0 × 0 × 0 m
    Answer
    0 L (0 US gal)
  2. 2

    With losses

    Formula
    × (1 + loss)
    Your numbers
    × 1
    Answer
    0 L (0 US gal)
  3. 3

    Ports

    Formula
    Length ÷ spacing + 1
    Your numbers
    0 ÷ 0 + 1
    Answer
    0

The theory behind it

Method used: Void volume of the crack

The resin fills the crack void: length × width × depth. Ports (packers) are fixed at a spacing roughly equal to the member thickness so the resin travels from one to the next.

Assumptions used

  • •Port spacing ≈ wall thickness, typically 150–300 mm.
  • •Epoxy for structural bonding (0.2–5 mm cracks); PU for leaking/live cracks.

Codes & references

  • ACI 224.1R — Causes, evaluation and repair of cracks
  • IS 15988:2013 — Seismic evaluation & strengthening
History

Estimates for guidance only. Confirm quantities with your site engineer.

© 2026 SiteMate. All rights reserved.