Rows that fit × floor(row length / bay width); compare both orientations
Your numbers
2 × floor(20 / 2.75)
Answer
14 theoretical bays
Why
Any fractional bay is discarded. Final access and vehicle turning checks can reduce this count.
The theory behind it
Method used: Whole 90° bays in single / paired rows, compared in both orientations
A parking bay is not just the car's footprint: it needs door clearance and a separate manoeuvring aisle. This screens a clear rectangle using one-row-plus-aisle or two-facing-rows-plus-aisle modules, repeating modules where space permits. It compares the two axis-aligned orientations, without counting tandem or blocked cars.
Assumptions used
•Shared-bay example: 2.75 × 5 m = 13.75 m² (148.00 ft²). Individual bay reference: 3 × 6 m = 18 m². Use larger bays for large vehicles and check local adopted rules.
•A 6 m aisle is an editable preliminary assumption, not a universal statutory width. A shared double-row module is 5 + 6 + 5 = 16 m deep.
•Enter a single clear available rectangle after buildings, paths, setbacks, ramps, columns and access reservations. Subtracting areas alone cannot describe scattered obstacles.
•Counts are theoretical before street/gate connection, cross-aisles, end-turning clearance, swept-path, pedestrian safety and accessible-bay checks. Multiple modules may lose spaces to connecting aisles.
•Open parking area allowance of 23 m²/ECS includes circulation and is only a separate planning comparison; dividing plot area by bay area does not establish usable capacity.
•Accessible spaces, EV equipment clearances, two-wheelers, parallel/angled layouts and local minimum parking counts need a separate site layout. This is not a sanctioned plan or guaranteed maximum.
Codes & references
BIS SP 73:2023, Table 25 — shared car bay 2.75 × 5 m; individual bay 3 × 6 m; open parking 23 m²/ECS including circulation. Local adopted rules govern. https://www.bis.gov.in/wp-content/uploads/2024/02/SP-732023-Standardized-Development-and-Building-Regulations-2023.pdf
BIS SP 73:2023 parking provisions — drives, aisles and adequate manoeuvring space are additional to the stipulated bays.