Sign in to save & sync
Sign in

Built-up I-section weight

Plate girder / PEB member weight per metre and total

Explanation in

Weight per metre

0

kg/m

Section area
0 mm² (0 cm²)
Total weight
0 t (0 US ton)

How we got this

  1. 1

    Area

    Formula
    2·bf·tf + (d − 2tf)·tw
    Your numbers
    2×0×0 + (0 − 0)×0
    Answer
    0 mm²
  2. 2

    Weight per metre

    Formula
    A × 7850
    Your numbers
    0 m² × 7850
    Answer
    0 kg/m
  3. 3

    Total

    Formula
    kg/m × L × n
    Your numbers
    0 × 0 × 0
    Answer
    0 kg (0 lb)

Short forms used above

m²
— Square metre (area)

The theory behind it

Method used: Area × 7850 kg/m³

A welded I-section is two flange plates and one web plate. Cross-section area = 2 × flange width × flange thickness + (depth − 2 × flange thickness) × web thickness. Weight per metre = area × 7850 kg/m³ (density of steel).

Assumptions used

  • •Weld metal and stiffeners not included — add 2–5%.
  • •Plates per IS 2062 E250 / E350.

Codes & references

  • IS 800:2007
  • IS 2062 — Hot-rolled structural steel
History

Estimates for guidance only. Confirm quantities with your site engineer.

© 2026 SiteMate. All rights reserved.